The RSSM-3-220V is a Brass body, normally closed solenoid valve. This model is 2-way and unidirectional controlling media to flow in a single direction. This valve stays on the closed position while the power is turned off and will open when it is provided power from a 220 Volt source. It is compatible with air, gas, water and other low viscosity fluids. This valve has a small orifice (3 mm) and not recommended for gravity fed systems.
This valve has a compact Brass body with a ¼” inlet and outlet port. The valve is unidirectional meaning it will work in one direction and not hold pressure against the exhaust port. If pressure is present at the exhaust of the valve a check valve is recommended.
This valve has a working pressure range from 0 – 145 PSI. This valve has Viton seal which is compatible with a wide array of media types. The media temperature can range as low as 15°F and up to 250°F or -10 to 120°C. The orifice size is 3 mm with a Cv of 0.4 which means that it can flow approximately 3 GPM of water at 60 PSI.
This specific valve has a 220 VAC coil with a voltage range that is -+ 10. The coil head is fitted with a 14’’ wire lead that can easily be soldered or connected with your own choice of terminals. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
This model works best mounted in an upright position with the coil on top. The body features a stamped arrow on the valve body to indicate the direction of flow. The valve body is threaded at the base and can be mounted with 5mm machine screws.
Customers commonly use the RSSM-3 Valve for Washing Machines, Dishwashers, Dental Tools, Fish Tanks, Beer Brewing, Hydroponics, HVAC and Plumbing.
*Consult a chemical compatibility expert for correct seal and valve body material choice.