1/8" 24V DC Electric Brass Solenoid Valve
Availability: In Stock
Technical Details
SKU
RSSM-2-24VDC
Position
Normally Closed
Port Size
1/8" Female NPT
Voltage
24V DC
Body Material
Brass
Components
Stainless Steel
Seal Material
Viton®
Orifice Size
2 mm
Temp Range
5 to 250° F
Pressure Range
0 - 115 PSI (No Minimum)
Flow Rate
Cv 0.12 (Appx 0.9 GPM @ 60 PSI)
Power
8 Watts
Coil Connection
Lead Wires
Coil Class
Class F (311°F)
Protection Class
IP65
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
10.58 oz
Height
2.62"
Length
1.60" port to port
Width
1.20"
Product Overview
The RSSM-2-24VDC is a compact Normally Closed 2-way valve with a 1/8” NPT inlet and outlet port. This valve will allow media to flow through the inlet port when powered. When the power is taken away, the valve will remain closed and will only open when power is reapplied. The seal is made of FKM rubber, commonly known as Viton. This type of seal can handle a wide range of media, making it well suited for air, water, fuels, weak acids, and many other chemicals, as well as media temperatures ranging from 5°F to 250°F. The valve features a solid brass body as well as a 24 Volt DC coil. A power source with a minimum of 8 watts is required.
The RSSM-2-24VDC operates within a recommended pressure range of 0-115 psi. Although there is no minimum pressure requirement, this valve is not suitable for gravity feed systems. The orifice is 2 mm and has a .2 Cv value. The operating position is Normally Closed, and the valve will only open when it is energized.
It is fast-acting and opens in under 1 second when 8 watts of 24V DC power is applied. The coil is IP65 equivalent and resistant to water and dust. The coil features two 5.5” lead wires that can easily be connected to a power source.
The brass body of the valve has ports that are standard FNPT 1/8” inch. The internal components are 316 stainless steel. This particular valve weighs 10 oz. Its measurements are 2.62” tall, 1.60” port-to-port, and 1.20 wide.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
