1" 12V DC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-25-12VDC
Position
Normally Closed
Port Size
1" Female NPT
Voltage
12V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
25 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
0 to 90 psi
Flow Rate
Cv 12 (Appx 92 GPM @ 60 PSI)
Power
16 W | 1.50 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
2 lb 3 oz
Height
4.50"
Length
3.35" port to port
Width
2.60"
Product Overview
The SZW-25-12VDC is a 12 Volt DC, 1” Stainless Steel, 2-way Solenoid Valve. This valve is compatible with a variety of media such as air, water, gas, diesel fuel, weak acids, and glycol. The valve features a solid stainless steel body with a Viton seal. It is suitable for temperatures from 15°F up to 250°F. This valve requires 18 watts from a DC power source typical of a car battery.
This SZW-25-12VDC has no minimum pressure requirements and can operate up to 90 psi. This makes it ideal for gravity-fed applications. The orifice size of the SZW-25-12VDC is 25 mm, allowing a higher flow rate when compared to other comparable solenoid valves.
The valve includes a 12 Volt DC coil that has a voltage tolerance of +-10%. This coil requires 16 watts or 1.5 Amps to operate the valve.
Installation
- The coil has no polarity, making power and ground interchangeable.
- The coil has 5.5” lead wire connections for easy installation.
- There is an arrow indicating the direction of flow on the stainless valve body.
- Installing with the coil up is the preferred method; however, the valve will operate in any position.
- A pre-filter should be installed to prevent the valve from leaking due to debris.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
