2" 24V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-50-24VAC
Position
Normally Closed
Port Size
2" Female NPT
Voltage
24V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
50 mm
Temp Range
5 to 250° F
Pressure Range
0 to 145 psi
Flow Rate
Cv 48 (Appx 370 GPM @ 60 PSI)
Power
23 VA | 1.00 Amps
Coil Connection
DIN 43650A
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
6 lb 3 oz
Height
6.50"
Length
5.51" port to port
Width
4.25"
Product Overview
The SZW-50-24VAC is a 24 Volt AC, 2-way, 2" Stainless Steel electric solenoid valve that can be used for liquid, water, gas, and air in a variety of different applications. This particular valve is Normally Closed, which means the valve will only open when power is applied and close when power is removed. This valve requires a 24 volt AC power supply to operate. This compact valve features a solid stainless steel body with a female NPT threaded port.
The SZW-50-24VAC valve has a 24 Volt AC coil with a voltage range that is -+ 10. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Common Applications
- This valve uses a Viton seal that is compatible with many liquids such as water up to 250°F, weak acids, and diesel fuel.
Installation
- This model is mountable in any position.
- It features a conveniently positioned arrow on the body to indicate the direction of flow.
- A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly.
- Connection: No Polarity; positive (+) and negative (–) can be interchanged.
- The coil head is fitted with a wire lead connection that can easily be connected to your own choice of terminals.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
