2" 12V DC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-50-12VDC
Position
Normally Closed
Port Size
2" Female NPT
Voltage
12V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
50 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
0 to 90 psi
Flow Rate
Cv 48 (Appx 345 GPM @ 60 PSI)
Power
21 W | 1.75 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
6 lb 3 oz
Height
6.50"
Length
5.51" port to port
Width
4.25"
Product Overview
The SZW-50-12VDC is the largest 12-volt stainless steel valve we offer. This solenoid valve delivers approximately 345 GPM at 60 psi. This fast-acting, normally closed 2-way valve has a type 304 stainless steel valve body and 2” female NPT input and output ports. A 12-volt DC coil opens and closes the valve in less than one second. It is rated for continuous service and draws 2.50 amps, for a nominal power consumption of 21 watts. The maximum operating pressure is 90 psi.
The SZW-50-12VDC is a great choice for any high-flow 12 volt applications. Its 304 stainless steel construction and Viton diaphragm make it compatible with a range of fluids including air, gas, water, diesel fuel, glycol, and weak acids.
The fast-acting normally closed 2” valve is operated by a 12V DC coil that opens or closes in less than one second. The coil draws 2.50 amps of current when operating, which gives the valve a nominal operational power consumption of 21 watts. Although rated for continuous service, the solenoid is not intended to remain energized indefinitely.
Among our largest capacity solenoid-operated valves, this valve’s operating parameters range from 0 to 90 psi pressure and temperatures from 15°F to 250°F. The valve orifice size is 50 mm when the semi-direct lift valve is in the open position. This specific valve does not require a minimum pressure to open or close. The overall weight of the valve is 6 lbs, 9 oz. Its length is 5.51” from port to port, height is 6.50”, and width is 4.25”. The threaded input and output connections are both 2” female NPT.
Common Applications
- It is well suited to use with potable water systems as well as other applications, including those requiring food-grade equipment. It is frequently used by municipalities to transfer fuel or water.
- Designed for versatility, this valve can be used with air, fuel, potable water, and in food-grade applications.
Installation
- Use of an inline filter is always recommended with solenoid-operated valves to ensure the diaphragm properly seals.
- It can be mounted in any orientation.
- The valve comes with 5.5” long lead wires for making the electrical connections.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
