2" 12V DC Stainless Steel Solenoid Valve N/O
Technical Details
Product Overview
The SZW-50K-12VDC is a 2" 12V DC normally open stainless steel solenoid valve designed for high-flow control of water, air, and other compatible media in commercial and industrial fluid systems. Its normally open configuration allows media to flow when power is off and closes the valve when 12V DC is applied. This makes it a practical choice for systems that need to maintain flow during a power interruption or require flow to stop only when electrical power is applied.
Built with a stainless steel body and internal components, this 2-way, semi-direct-acting solenoid valve features a Viton® diaphragm for compatibility with a range of fluids. The 50 mm orifice and Cv of 48 provide an approximate flow rate of 370 GPM at 60 psi. It operates at 0–90 psi, with a media temperature range of 5°F to 250°F. The valve features 2" female NPT ports, a 12V DC coil, and a DIN 43650A electrical connection. Requiring 3.25 amps to actuate, it responds in less than one second and is rated for 100% duty at rated ambient temperature. Its IP54-rated coil protects against dust and water splashes.
Common Applications
Common applications for this normally open stainless steel solenoid valve include:
- High-flow water circulation: Control water flow in commercial and industrial circulation systems.
- Emergency cooling systems: Maintain cooling-water flow when electrical power is interrupted, where a default-open valve is appropriate.
- Bypass and recirculation lines: Control flow through bypass circuits and recirculation systems.
- Process draining: Control drainage in industrial fluid-handling systems.
- Purging systems: Manage air or compatible fluid flow in process purge lines.
Installation
- Install the valve in line with the flow-direction arrow on the stainless steel body. This is a unidirectional valve.
- Connect the piping to the valve's 2" female NPT inlet and outlet ports.
- Use a correctly rated 12V DC power supply capable of supplying the required 1.75 amps, using the DIN 43650A electrical connection.
- Install an upstream inline filter to help prevent debris from entering the valve and interfering with diaphragm operation.
- Install with the coil preferably in the upright position.
- Confirm that the operating pressure, temperature, media, and normally open configuration are appropriate for the system before installation.
- Protect the IP54-rated coil from direct water jets and spray-down conditions; it is splash-resistant, not waterproof or submersible.
*Consult a chemical compatibility expert for correct seal and valve body material choice.