2" 12V DC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-50-12VDC
Position
Normally Closed
Port Size
2" Female NPT
Voltage
12V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
50 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
Water: 0-90 PSI | Air 7-90 PSI
Flow Rate
Cv 48 (Appx 345 GPM @ 60 PSI)
Power
21 W / 1.75 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
6 lb 3 oz
Height
6.50"
Length
5.30" port to port
Width
4.25"
Product Overview
The SZW-50-12VDC is the largest 12-volt stainless steel valve we offer. This solenoid valve delivers approximately 345 GPM at 60 psi. This fast-acting, normally closed 2-way valve has a type 304 stainless steel valve body and 2” female NPT input and output ports. A 12-volt DC coil opens and closes the valve in less than one second. It is rated for continuous service and draws 2.50 amps, for a nominal power consumption of 21 watts.
Designed for versatility, this valve can be used with air, fuel, potable water, and in food-grade applications. Its Viton diaphragm resists heat, oils, and chemicals, allowing its use at temperatures up to 250°F. The maximum operating pressure is 90 psi.
The SZW-50-12VDC is a great choice for any high-flow 12 volt applications. Its 304 stainless steel construction and Viton diaphragm make it compatible with a range of fluids including air, gas, water, diesel fuel, glycol, and weak acids.
The fast-acting normally closed 2” valve is operated by a 12V DC coil that opens or closes in less than one second. The coil draws 2.50 amps of current when operating, which gives the valve a nominal operational power consumption of 21 watts. Although rated for continuous service, the solenoid is not intended to remain energized indefinitely.
Among our largest capacity solenoid-operated valves, this valve’s operating parameters range from 0 to 90 PSI pressure and temperatures from 15°F to 250°F. The valve orifice size is 50 mm when the semi-direct lift valve is in the open position. This specific valve does not require a minimum pressure to open or close.
Common Applications
It is well suited to use with potable water systems as well as other applications, including those requiring food-grade equipment. It is frequently used by municipalities to transfer fuel or water.
Installation
The threaded input and output connections are both 2” female NPT. Use of an inline filter is always recommended with solenoid-operated valves to ensure the diaphragm properly seals.
The overall weight of the valve is 6lbs, 9 oz. Its length is 5.30” from port to port, height is 6.50”, and width is 4.25”, and it can be mounted in any orientation. The valve comes with 5.5” long lead wires for making the electrical connections.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
