2" Stainless Steel Steam Solenoid Valve
Technical Details
Product Overview
The 2" Stainless Steel Steam Solenoid Valve SRS-50 is designed for high-capacity steam control in industrial heating and process systems. Its 304 stainless steel body and PTFE seals provide durable construction for saturated steam, condensate, and compatible high-temperature liquids and gases.
This 2-way, semi-direct-acting, normally closed solenoid valve remains closed when power is off and opens when energized. Its semi-direct-acting design allows operation at zero differential pressure, supporting reliable actuation during system startup and fluctuating pressure conditions where fully pilot-operated valves may not function properly.
With a 50 mm orifice and Cv of 48, the SRS-50 is the largest valve in the SRS series and is suited to high-capacity steam mains, central steam distribution lines, large jacketed vessels, and industrial process heating equipment. Its steam-rated Class H coil supports continuous-duty operation and uses hard-wired leads for permanent electrical connections through conduit or a junction box. Due to its size and weight, proper pipe support or bracketing is recommended for long-term reliability.
Common Applications
The SRS-50 delivers the highest flow capacity, and it is commonly installed in:
- Industrial steam distribution: Controls steam flow through large steam mains and central distribution piping.
- Jacketed tanks and vessels: Automates steam supply to large vessels used for heating and temperature-controlled processing.
- CIP systems: Controls steam flow in compatible clean-in-place equipment and industrial cleaning systems.
- Heat exchangers: Provides automatic steam control for high-capacity process heating and heat transfer.
- Steam humidification: Controls steam supply in commercial and industrial humidification systems.
- Steam ovens and thermal processing: Supports automatic steam control in industrial ovens and thermal processing equipment.
- Sterilization and cleaning systems: Controls steam supply in compatible industrial sterilization and cleaning equipment.
Installation
- Install in a compatible 2" female NPT piping system and follow the flow-direction marking on the valve body.
- The SRS series can be mounted vertically or horizontally.
- Install a check valve downstream to help prevent back pressure and support proper valve operation.
- Confirm that operating pressure remains within the rated range for the selected coil.
- Keep media temperatures within the valve's maximum rated temperature of 356°F.
- Select the correct coil voltage: 110V AC, 220V AC, or 24V DC.
- The coil uses wire leads for hard-wired electrical connections through an appropriate conduit or junction box.
- Ensure electrical connections are properly insulated and protected for the installation environment.
- Flush the piping before installation to help prevent debris from entering the valve and interfering with operation.
- Due to the valve's size and weight, provide adequate pipe support or bracketing to prevent unnecessary stress on the valve body and connections.
- Follow proper steam installation practices and provide for safe condensate management.
*Always confirm that the valve's pressure, temperature, materials, and electrical configuration are suitable for the specific steam or high-temperature fluid application.