3/4" 110V AC Stainless Steel Solenoid Valve N/O
Availability: In Stock
Technical Details
SKU
SZW-20K-110VAC
Position
Normally Open
Port Size
3/4" Female NPT
Voltage
110V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
20 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
0 to 90 psi
Flow Rate
Cv 7.6 (Appx 58 GPM @ 60 PSI)
Power
15 VA | 0.15 Amps
Coil Connection
DIN 43650B
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
1 lb 10 oz
Height
4.70"
Length
2.65" port to port
Width
2.00"
Product Overview
The SZW-20K-110VAC is a 3/4" normally open stainless steel solenoid valve designed to control water, air, and other compatible fluids in commercial, residential, and industrial systems. Its 110V AC coil keeps the valve closed when energized and allows it to return to the open position when power is removed. This fail-open operation makes it a good fit for systems where maintaining flow during a power interruption is important, such as cooling-water circulation, bypass lines, recirculation systems, and draining or purging applications.
Built with a stainless steel body and internals and a Viton® diaphragm, this 2-way valve has 3/4" female NPT ports and a 20 mm orifice. It provides a Cv of 7.6 and a rated flow of approximately 58 GPM at 60 psi. The valve operates with water pressures from 0–90 psi, with a media temperature range of 15°F to 250°F. The 110V AC coil draws 15 VA/0.15 amps, has a response time of less than one second, and is rated for 100% duty at the specified ambient temperature.
Common Applications
Common applications for this valve include:
- Cooling-water circulation and equipment cooling loops
- Industrial water control and process-water distribution
- Water treatment and filtration equipment
- Bypass and recirculation lines
- Gravity-fed draining, venting, and purging
- Humidifiers and water sprinkler systems
- Air compressors and pneumatic systems
- Fluid dispensing and dosing systems
Because this is a normally open valve, it is best suited to applications where flow should continue when power is off. Confirm that this default-open condition is appropriate for the system before selecting it.
Installation
- Install the valve in the direction indicated by the flow arrow on the body
- The SZW series can be mounted vertically or horizontally.
- Flush piping before installation, and we recommend an upstream filter to help prevent debris from interfering with the diaphragm or valve operation.
*Consult a chemical compatibility expert to confirm proper valve body and seal materials for your application.
