3/8'' 12V DC Electric Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-10-12VDC
Position
Normally Closed
Port Size
3/8" Female NPT
Voltage
12V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
5 to 250°F
Pressure Range
0 to 90 psi
Flow Rate
Cv 3.5 (Appx 27 GPM @ 60 psi)
Power
16 Watts | 1.50 Amps
Coil Connection
Lead Wires
Protection Class
IP54
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water | Air | Fuel
Weight
1 lb 5.9 oz
Height
4.00"
Length
2.36" port to port
Width
1.80"
CAD Files
Available upon Request
Product Overview
This 3/8" 12 V DC stainless steel electric solenoid valve provides fast, reliable flow control for liquids, gases, diesel fuel, glycol, and high-temperature water in 12V DC low-voltage systems. Constructed with a heavy-duty stainless steel body and a Viton (FKM) diaphragm seal, this 2-way normally closed valve features a fast-acting response time (< 1 second) and operates at zero pressure differential.
Media & Temperature Notice:
-
-
- Equipped with a premium Viton® (FKM) diaphragm, this valve is rated for fluid temperatures from 15°F up to 250°F.
- Viton provides excellent resistance to diesel fuel, oils, glycol, weak acids, and harsh fluids that degrade standard NBR rubber.
- Always verify chemical compatibility with both the stainless body and Viton seal before installation.
-
Key Features
- Stainless Steel & Viton Construction: High chemical, corrosion, and temperature resistance for aggressive media, food-safe fluids, and outdoor environments.
- 12V DC Low-Voltage Operation: Wire leads connect directly into vehicle electrical systems, 12V batteries, solar charge controllers, and mobile power packs (non-polarized).
- Zero Differential Operation: Direct-assisted lift design opens and seals reliably from 0 psi up to maximum working pressure.
- Fast-Acting Response: Opens and closes in less than one second for precise on/off flow timing.
- Normally Closed Safety: Valve remains closed during power loss to automatically shut off fluid media flow.
Common Applications
- Auxiliary diesel fuel transfer, vehicle fuel management, and glycol heating loops
- RV, marine, and mobile food truck plumbing and high-temp hot water systems
- Solar-powered water management, remote irrigation, and agricultural chemical spraying
- Reverse osmosis (RO) water purification, chemical dosing, and weak acid handling
- Field environmental sampling, battery-operated compressed air loops, and gas purging
Installation
- Align media flow with the directional arrow on the valve body.
- The non-polarized 12V DC wire leads may be connected in either orientation.
- For optimal performance and long service life, install the valve with the coil facing upward.
- Place an inline strainer or filter upstream to keep particulates out of the diaphragm chamber.