3/8'' 24V DC Electric Brass Solenoid Valve N/O

Technical Details

Product Overview

The BZW-10K-24VDC is a durable 3/8" brass solenoid valve engineered for fail-open, zero-differential fluid control in 24V DC industrial and battery-powered systems. Featuring a high-performance Viton® (FKM) diaphragm seal and a direct-assisted lift mechanism, this 2-way Normally Open (N/O) valve remains open when de-energized to permit unrestricted flow at 0 PSI, closing in less than one second when 24V DC power is applied.

Normally Open Application & Media Notice:

• • • This valve is Normally Open (remains open when de-energized and closes when energized). It is designed specifically for fail-open setups, gravity-fed drains, freeze/overheat protection loops, and safety bypass lines.
    • Built with a solid brass body and a Viton® (FKM) diaphragm rated up to 250°F for water, compressed air, diesel fuel, and glycol. Brass is not recommended for salt water, deionized water, or aggressive acids.
    • Always verify chemical compatibility before installation.

Key Features

• Solid Brass Body & Viton® Seal: Excellent mechanical durability and thermal resistance (up to 250°F) for water, air, diesel fuel, and neutral gases.

• Normally Open (Fail-Open) Operation: Keeps fluid flowing or lines drained during power loss—essential for emergency dump lines, cooling loops, and safety circuits.

• 24V DC Automation & Battery Integration: Non-polarized lead wires connect directly into 24V DC PLCs, industrial control boards, solar controllers, and 24V battery banks.

• Zero Differential Operation: Direct-assisted design operates reliably from 0 PSI (gravity feed) up to maximum working pressure.

• Fast-Acting & Continuous Duty: Closes in under one second when energized and rated for 100% continuous-duty operation.

Common Applications

• Commercial laundry machine fill lines, rinse cycle water control, and inlet shutoff

• Industrial humidifier feed lines, reservoir make-up water control, and humidification system shutoff

• 24V DC battery-powered irrigation, fertigation flushes, and remote fluid management

• Auxiliary diesel fuel transfer bypass, generator fuel lines, and glycol circulation

• Commercial beverage equipment, high-temp sanitizing dump lines, and gas purge loop

• Batch dispensing lines, dosing pump feed control, and metered fill and top-up stations

• Process water branch line control, tank fill and transfer, and recirculation loop isolation

Installation

• Align media flow with the directional arrow cast into the brass body.
• Non-polarized 24V DC lead wires can be connected in either orientation.
• For optimal service life and reliable seal closure, especially in gravity-fed drain lines, mount the valve with the coil facing upward.
• Install an inline strainer upstream to keep sediment off the Viton® diaphragm.

Warranty