1/2" 24V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-15-24VAC
Position
Normally Closed
Port Size
1/2" Female NPT
Voltage
24V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
0 to 145 psi
Flow Rate
Cv 3.5 (Appx 36 GPM @ 60 PSI)
Power
19 VA | 0.80 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
1 lb 6 oz
Height
4.00"
Length
2.36 " port to port
Width
1.80"
Product Overview
The SZW-15-24VAC is a 24 Volt AC, 2-way, 1/2" Stainless Steel electric solenoid valve that can be used for liquid, water, gas, and air in a variety of different applications. This is a 2-way valve, which means the valve will stay closed until power is applied, holding the position until the power state is changed.
This valve features a Viton seal, which is capable of handling media temperatures as high as 250°F and as low as 15°F. This compact valve is constructed of solid stainless steel with a threaded female NPT port. The valve has a 15 mm orifice, and the flow rate can be calculated using the valve's Cv of 3.5.
The SZW-15-24VAC stainless steel solenoid valve is fitted with a 19 VA AC coil. The coil is rated for a 100% duty cycle but not indefinitely.
Common Applications
- This is a great general-purpose valve that can be used for a variety of different applications where media automation is required.
Installation
- There is a directional arrow on the body that indicates the direction of flow.
- A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly.
- This AC coil requires AC power. The coil is fitted with two lead wires that can be connected with your choice of terminal connectors or directly soldered.
- Connection – No Polarity; positive (+) and negative (–) can be interchanged.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
