1/8" 24V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SS-2J-24VAC
Position
Normally Closed
Port Size
1/8" Female NPT
Voltage
24V AC
Body Material
316 Stainless Steel
Components
304 Stainless Steel
Seal Material
Viton®
Orifice Size
2 mm
Temp Range
5 to 250°F
Pressure Range
0 - 145 PSI (No Minimum)
Flow Rate
Cv 0.12 (Appx 0.9 GPM @ 60 PSI)
Power
10 VA
Coil Connection
Lead Wires
Coil Insulation & Class
Class F (311°F)
Protection Class
IP 65
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel - *Etc.
Weight
10 oz
Height
2.62"
Length
1.60" port to port
Width
1.20"
Product Overview
The SS-2J-24VAC is a compact, direct-acting 1/8" stainless steel solenoid valve engineered for precise, zero-differential flow control in low-voltage automated systems. Built with a solid stainless steel body and a high-performance Viton (FKM) seal, this 2-way normally closed valve operates reliably from 0 PSI up to its maximum pressure rating, opening automatically when energized by a standard 24V AC power source.
Media Compatibility Notice: Equipped with a premium Viton® (FKM) seal, this valve is rated for hot water up to 250°F, diesel fuel, light oils, weak acids, and harsh fluids that degrade standard NBR rubber. Always verify chemical compatibility with both the stainless body and Viton seal before installation.
Key Features
-
Stainless Steel & Viton Construction: Excellent corrosion, chemical, and temperature resistance for demanding liquids and gases.
-
24V AC Low-Voltage Operation: Integrates directly with standard HVAC transformers, thermostat controllers, irrigation timers, and 24VAC PLC outputs.
-
Zero Differential Operation: Direct-acting design opens and closes instantly at 0 PSI without requiring minimum line pressure.
-
Normally Closed Safety: Valve remains closed during power loss to automatically shut off media flow.
-
Compact Footprint: 1/8" female NPT ports designed for tight machinery enclosures, manifolds, and low-flow dosing loops.
Common Applications
-
HVAC equipment, commercial humidification, and solar thermal heating loops
-
Automated hydroponics, fertigation systems, and liquid additive dosing
-
Commercial espresso machines, beverage equipment, and high-temp water control
-
Low-voltage diesel fuel transfer, auxiliary heaters, and oil lines
-
PLC-driven industrial automation, laboratory test benches, and compressed air lines
Installation
- Align media flow with the directional arrow cast into the stainless valve body.
- The non-polarized 24V AC coil wire leads can connect to either AC supply conductor.
- For optimal service life, mount the valve with the coil facing upward.
- Install an inline filter upstream to keep debris off the Viton seal.
