1/8" 24V DC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SS-2J-24VDC
Position
Normally Closed
Port Size
1/8" Female NPT
Voltage
24V DC
Body Material
316 Stainless Steel
Components
304 Stainless Steel
Seal Material
Viton®
Orifice Size
2 mm
Temp Range
5 to 250°F
Pressure Range
0 - 115 PSI (No Minimum)
Flow Rate
Cv 0.12 (Appx 0.9 GPM @ 60 PSI)
Power
8 W
Coil Connection
Lead Wires
Coil Insulation & Class
Class F (311°F)
Protection Class
IP 65
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel - *Etc.
Weight
10 oz
Height
2.62"
Length
1.60" port to port
Width
1.20"
Product Overview
The SS-2J-24V DC is a compact, 2-way normally closed direct-acting solenoid valve engineered for zero-differential, fast-acting fluid control in OEM, laboratory, and industrial automation applications. Featuring a durable stainless steel body and a high-performance Viton® (FKM) seal, this valve delivers dependable shut-off control across a wide range of liquids and gases.
Media Compatibility & Operating Notice:
-
-
-
- Normally Closed (remains closed when de-energized, opens instantly when 24V DC power is applied).
- Direct-acting design operates from 0 PSI up to the maximum pressure rating. Solid stainless steel construction with a Viton® seal rated up to 250°F for hot water, compressed air, diesel fuel, and mild chemical solutions.
- Not for use in medical life support, aviation, combustion, or critical safety applications.
-
-
Key Features
-
Solid Stainless Steel Body & Internals: Corrosion-resistant construction provides long service life and high fluid compatibility over standard brass.
-
Direct-Acting Zero-Differential Design: Operates reliably at 0 PSI—ideal for gravity-fed lines, low-pressure gas venting, and vacuum applications.
-
High-Temp Viton® (FKM) Seal: Resists temperatures up to 250°F and provides compatibility with hot water, air, diesel fuel, and weak acids.
-
Compact 1/8" NPT Footprint: Micro-body footprint integrates easily into crowded control panels, analytical instruments, and OEM equipment.
-
Non-Polarized 24V DC Lead Wires: Flying lead wires connect directly into 24V DC automation circuits without polarity restrictions.
Common Applications
-
Automated fluid dispensing, laboratory sampling loops, and analytical gas purging
-
High-pressure misting systems, fogging loops, and commercial humidification
-
Water treatment chemical dosing, RO filtration skids, and aquarium/hydroponic controls
-
Pneumatic control manifolds, vacuum venting, and test bench calibration rigs
-
OEM machinery, packaging gas-assist lines, and general fluid isolation
Installation
- Align media flow with the directional arrow cast into the stainless steel body.
- Mount in any orientation (coil-up is recommended for maximum service life).
- Apply standard PTFE tape or approved thread sealant to 1/8" male NPT fittings, taking care not to let tape overhang the first thread.
- Install an upstream inline filter to protect internal seals from particulate contamination.
*Always verify chemical compatibility before installation. Consult a chemical compatibility expert to confirm the suitability of the valve body and seal materials for your specific application.
