3/4" 24V AC Electric Brass Solenoid Valve
$46.95
3/4" 24V DC Electric Brass Solenoid Valve
SKU: 2W-200-20-24V
Availability: In Stock
Quick Links
Technical Details
SKU
2W-200-20-24V
Position
Normally Closed
Port Size
3/4" Female NPT
Voltage
24V DC
Body Material
Brass
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
20 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
0 - 115 PSI (No Minimum)
Flow Rate
Cv 7.6 (Appx 58 GPM @ 60 PSI)
Power
28 Watts / 1.50 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - Fuel - *Etc
Weight
1 lb 10 oz
Height
4.25
Length
2.65" port to port
Width
2.00"
Product Overview
Featured here is Model 2W-200-20 of our brass valve line. This particular valve is a two-way, semi-direct lift valve with a normally closed operating position. This means that there are two ports in which media flows and the valve will open when the coil is energized to allow media to pass through. Removing the energy from the valve coil will close it and stop the flow. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects.
The port size is 3/4” inch female NPT threaded. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The orifice size is 20mm and the Cv value is 7.6. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 15°F and as high as 250°F. The seal material is VITON.
This specific valve has a 24 Volt DC coil with a voltage range that is -+ 10. The coil head is fitted with a 5’’ wire lead that can easily be connected with your own choice of terminals. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Customers commonly use the 2W-200-20 Valve for Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied.
This model is mountable in any position and features a conveniently positioned arrow on the body to indication the direction of flow.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
Warranty
Electricsolenoidvalves.com guarantees our valves to be free from defects in workmanship and materials under normal use for One year from the date of purchase. For complete terms of this warranty see our Warranty Terms & ConditionsReviews Write a Review
N/O valve preventing fater flow when UV water purification is not on.
This valve replaced an AC soloneoid valve that produced a constant humming noise. It does the job satisfactorily and silently. It becomes hot when operating and produces a knock when it comes on, but so did the other one.
electric valve
good service good product
Solid brass construction air solenoid valve
It is a brass constructed valve, so as the coil. It last much longer than the plastic one I bought.
It is very good product
I like this product, but it was hard to find. I'm happy now with what I got.
Happy Camper
I bought this as a water control valve and it has been working perfectly. I'm very happy I was able to find it and recieved it quickly.
Good quality
This valve appeared to be very high quality and arrived very quickly with standard shipping but unfortunately I needed an AC version which seems to be impossible to find. I had to return it without trying it out.
