3/4" UPVC Electric Ball Valve - 3 Wire
Technical Details
Product Overview
The model BVP5CE is a ¾” Motorized Ball Valve with a UPVC molded body. The molded plastic body has ¾” NPT inlet and outlet ports. The valve seals are EPDM and PTFE. This component combination makes this valve an excellent choice for corrosive chemicals like saltwater and acids. Since there are no wetted metal parts, this choice is perfect when a metallic valve can’t be used.
Voltage Range:
- 9 to 24V AC/DC (auto-detects voltage)

This valve comes with a 3-wire control actuator that allows the position to be controlled with a momentary switch. The actuator requires 9 to 24V AC/DC to turn the ball's position. This actuator has an internal voltage detector that allows it to work within the specified range. A minimum of 500 mA is required to rotate the ball. The valve can be left in either position without requiring consistent power. The valve also features a position indicator on top of the motor so the position of the ball can be seen. The ball takes approximately 8 seconds to switch position, which eliminates water hammer.
Installation
- These valves work bi-directionally, meaning the flow through the body can enter through either port.
- The valves' IP67 enclosure rating makes them suitable for spray days and other wet locations; however, they should never be submerged.
*Consult a chemical compatibility expert for the correct seal and valve body material choice.