1" 24V DC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-25-24VDC
Position
Normally Closed
Port Size
1" Female NPT
Voltage
24V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
25 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-115 PSI | Air 7-115 PSI
Flow Rate
Cv 12 (Appx 92 GPM @ 60 PSI)
Power
28 Watts / 1.50 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - Fuel - *Etc
Weight
2 lbs 5 oz
Height
4.50"
Length
3.25" port to port
Width
2.60"
Product Overview
The SZW-25-24VDC is a 1” Inch, 2 way, Stainless Steel solenoid valve with a 24 Volt DC coil. It is compatible with a variety of media such as liquids, gas, air, fuel, glycol and weak acids. This 24 Volt DC general purpose solenoid valve is a great choice when working with 24V DC power. It has a temperature range between 15°F and 250°F.
The SZW-25-24VDC is a solid Stainless Steel valve that features 1” inch female NPT inlet and outlet ports. This particular valve weighs approximately 2lbs 6ozs and measures 4.5” height, 2.60 wide and 3.25” port to port. Its compact size is great for fitting in tight places without compromising quality.
It is fitted with a 24 Volt Dc coil that requires 28 watts, or 1.50 amps of DC power to actuate. The coil is included with the valve. The connection can be made with the 5.5” lead wires using solder or terminal connectors. The coil has a voltage tolerance of +-10%. It is rated for 100% duty cycle but should not be powered indefinitely.
There are no minimum pressure requirements and the valve can handle pressure up to 115 PSI. The valve has a 25mm orifice and its flow rate can be calculated using the Cv value of 12.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
