1-1/2" 24V DC Stainless Steel Solenoid Valve N/O

Availability: In Stock

Technical Details

Position Normally Open
Port Size 1-1/2" Female NPT
Voltage 24V DC
Body Material Stainless Steel
Components Stainless Steel
Seal Material Viton® Diaphragm
Orifice Size 40 mm
Temp Range 15 to 250° F / -10 to 120°C
Pressure Range Water: 0-90 PSI | Air 7-90 PSI
Flow Rate Cv 29 (Appx 220 GPM @ 60 PSI)
Power 40 Watts / 1.75 Amps
Coil Connection DIN 43650A
Response Time Fast Acting (Less than one second)
Duty Cycle 100% but not indefinitely
*Suitable Media Water – Air - Fuel - *Etc
Weight 5 lbs 3 oz
Height 7.00"
Length 4.50" port to port
Width 3.25"

3D Models

Product Overview

Our 1-1/2" 24 Volt DC Normally Open Stainless Steel bodied valve is ideal for applications that require the control of constant flow. As a normally open valve this unit will remain in the open position until power is applied, quickly closing the valve. The 304 stainless steel valve body paired with the Viton diaphragm allow this valve to operate effectively across a wide range of fluids. This valve requires no pressure to operate and will work in a gravity feed system. 

The coil on this valve is IP54 rated or the equivalent to a NEMA 3. This means that it is splash resistant but not intended to be installed in a wet environment. To effectively work, the valve will need to be paired with a 24 VDC power supply capable of 1.75 amps of power. The valve can easily connect to your power supply with its 43560A DIN connection. The DIN connection comes pre-wired.

This valve requires 40 Watts of power and a current of 1.75 amps. The temperature range is between 15 to 250°F or -10 to 120°C. The pressure range is from 0 to 90 psi. 

 *Consult a chemical compatibility expert for correct seal and valve body material choice.

Warranty guarantees our valves to be free from defects in workmanship and materials under normal use for One year from the date of purchase.

For complete terms of this warranty see our Warranty Terms & Conditions