The NOS-24VAC solenoid valve has a Stainless Steel body and fitted with a 24 Volt AC coil. This valve is configured in the Normally Open position meaning that the valve will stay open until 1.75 Amps of 24 Volt AC power is applied. This valve comes with a Viton diaphragm which is compatible with a wide array of media types such as air, light oils, diesel fuel, glycol and potable water. This valve has an IP54 coil compatible to a NEMA3 which is resistant to water but can't be sprayed down. The unit comes with a 3 prong DIN connector that can be easily connected to your power source.
|Temperature Range||15 to 265° F||-10 to 130°C|
|Pressure Range||0 - 90 PSI (No Minimum Pressure)|
|Flow Rate||Cv 45 (Appx 345 GPM @ 60 PSI)|
|Power Requirments||40 Watts||1.75 Amps|
|Response Time||Fast Acting (Less than one second)|
|Duty Cycle||100% but not indefinitely|
|*Suitable Media||Water – Air - Fuel - Etc|
*Consult a chemical compatibility expert for correct seal and valve body material choice.
|Port Size||2” Inch Female NPT|
|Valve Body||304 Stainless|
|Seal Material||Viton® Diaphragm|
|Operation Type||Semi-Direct Lift Valve|
|Coil Connection||DIN with lead wires|
|Weight||7 lb 8 oz|
|Length||5.30" port to port|