1-1/2" Stainless Electric Ball Valve - 2 Wire Auto Return
Availability: In Stock
Technical Details
SKU
BVS8CE-XR22
Port Size
1-1/2" Female NPT
Wiring Type
2-Wire Power-to-Open, Power-off-to-close
Actuator
3.47" (actuator)
Actuation Method
Capacitor-Assisted
Voltage Range
Select Above (auto detects voltage
Body Material
304 Stainless Steel
Components
Stainless Steel
Seal Material
EPDM
Ball Seat
PTFE
Gears
Metal
Bore Type
Full
Flow
Bi-Directional
Media Temperature
Same as current specs
Ambient Temperature
5 - 120°F / -15 to 50 °C
Pressure Range
0 - 185 PSI (No Minimum)
Max Torque
10 Nm
Closing / Opening Time
≤15 Seconds
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - *Etc
Enclosure Rating
IP67 (NEMA 4 equivalent)
Min. Energized Time
60 Seconds
Weight
3 lb 8.8 oz
Height
6.48"
Length
4.50" port to port
Width
3.47" (actuator)
Life Expectancy
70,000 Cycles
Fail position
Closed on power loss
Recommended Maximum Cycling Rate
Recommended Maximum Cycling Rate (Additional) ≤ 45 cycles/hour
Product Overview
Choose an XR22 wiring option above:
- 9 to 24V AC/DC (auto-detects voltage)
- 110 to 230V AC
Our 1-1/2” Electric Ball Valve is ideal for applications requiring maximum flow. Ball valves are desirable not only for their high flow rates but because they are bi-directional. This means the valve will work with the flow in either direction.
The valve does have a delayed close time when compared to similar-sized solenoid valves. The mechanical ball inside the valve will require up to 12 seconds to fully switch positions. This unit’s body is constructed of 304 Stainless Steel. The internal components are made up of 316 stainless, PTFE, and EPDM. This is a good solution if you're looking for a shut-off valve in a residential or commercial project.
Valve Details
This valve features:
- An XR-22 actuator with two lead wires.
- It is powered to open and will remain open while powered.
- The internal capacitor powers the motor to turn the ball 90 degrees back to its normal position when power is removed.
- This actuator requires a minimum energized cycle of at least 60 seconds to ensure the internal capacitor is fully charged and has enough power to close the valve completely.
- Cycle times shorter than 60 seconds may result in partial or incomplete closures.
- While powered, the internal capacitor will charge and draw minimal power to remain charged. Once power is removed, the capacitor will power the valve to the closed position.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
Warranty
Electricsolenoidvalves.com guarantees our valves to be free from defects in workmanship and materials under normal use for One year from the date of purchase. For complete terms of this warranty see our Warranty Terms & ConditionsRelated Products
-
-
1" Stainless Electric Ball Valve - 2 Wire Auto Return
from:$108.40 -
2" Stainless Electric Ball Valve - 2 Wire Auto Return
from:$517.09 -
1/2" Brass Electric Ball Valve - 2 Wire Auto Return
from:$77.18 -
1" Brass Electric Ball Valve - 2 Wire Auto Return
from:$85.96
