1/2" 24V DC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-15-24VDC
Position
Normally Closed
Port Size
1/2" Female NPT
Voltage
24V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
0 to 90 psi
Flow Rate
Cv 3.5 (Appx 27 GPM @ 60 PSI)
Power
28 W | 1.20 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
1 lb 6 oz
Height
4.00"
Length
2.36 " port to port
Width
1.80"
Product Overview
The SZW-15-24VDC is a 24 Volt DC, 2-way, Stainless Steel Solenoid Valve with 1/2" inch female NPT ports. This valve utilizes a Viton seal that can be used for liquid, water, gas, air, and many other media types. This is a 2-way valve, which means the valve will stay closed until power is applied, holding the position until the power state is changed.
This valve is capable of handling media temperatures as low as 15°F and as high as 250°F. The valve is fitted with a DC coil that requires DC power to operate. The semi-direct lift style of this valve allows for high flow rates, and no minimum pressure is required for the valve to open. The valve has a 15 mm orifice, and the flow rate can be calculated using the valve's Cv of 3.5.
The SZW-15-24V DC stainless steel solenoid valve is fitted with a 28 Watt DC coil. The coil is rated for a 100% duty cycle but not indefinitely.
Common Applications
This is a great general-purpose valve that can be used for a variety of different applications where media automation is required.
Installation
- There is a directional arrow on the body that indicates the direction of flow.
- A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly.
- Connection – No Polarity; positive (+) and negative (−) can be interchanged.
- This DC coil requires DC power to operate. The coil is fitted with two lead wires that can be connected with your choice of terminal connectors or directly soldered.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
