1/4'' 12V DC Push Connect Plastic Solenoid Valve
Availability: In Stock
Technical Details
SKU
RSC-A2-12VDC
Position
Normally Closed
Port Size
1/4" Quick Connect
Voltage
12V DC
Body Material
Polypropylene Plastic
Components
Stainless Steel
Seal Material
EPDM
Orifice Size
2 mm
Temp Range
25 to 175° F / -5 to 80°C
PSI Range
3 - 115 PSI (Minimum Required)
Flow Rate
Cv 0.2 (Appx 1.5 GPM @ 60 PSI)
Power
5 Watts
Coil Connection
Terminal
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - *Etc
Weight
4 oz
Height
2.30"
Length
2.50" port to port
Width
1.34"
Product Overview
Model RSC-A2 of our plastic valve line is a two-way, direct-acting valve with a normally closed operating position. This means that there are two ports through which media flows, and the valve will open when energized to allow media to pass through. Taking the energy away from the valve will close it and stop the flow. It works across various media such as water, air, and other low-viscosity fluids.
The port size is 1/4” Push In Connect used with 1/4" OD Tubing. The orifice size is 2 mm. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 25 F and as high as 175 F. The seal material is EPDM Rubber.
This specific plastic valve has a 12 Volt DC coil with a voltage range that is -+ 10%. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Common Applications
Common uses include, but are not limited to;
- Water Filters
- Ice Makers
- Drinking Fountains
- Washing Machines
- Dishwashers
- Dental Tools
- Fish Tanks
- Beer Brewing
- Hydroponics
Installation
- This model is mountable in any position.
- It features a conveniently positioned arrow on the body to indicate the direction of flow.
- The valve body is threaded at the base and can be quickly mounted with 4 mm machine screws.
