1/8'' 120V AC Electric Plastic Solenoid Valve
Availability: In Stock
Technical Details
SKU
RSC-1-120V
Position
Normally Closed
Port Size
1/8" Female NPT
Voltage
110V AC
Body Material
Polypropylene Plastic
Components
Stainless Steel
Seal Material
EPDM Seals
Orifice Size
2.5 mm
Temp Range
32 to 212° F / -0 to 100°C
PSI Range
0 - 115 PSI (No Minimum)
Flow Rate
Cv 0.2 (Appx 1.5 GPM @ 60 PSI)
Power
7 VA
Coil Connection
Lead Wires
Coil Class
Class B (266°F)
Protection Class
IP54
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - *Etc
Weight
4.58 oz
Height
2.64"
Length
1.53" port to port
Width
1.24"
Product Overview
Model RSC-1 of our plastic valve line is a two-way, direct-acting valve with a normally closed operating position. This means that there are two ports through which media flows, and the valve will open when energized to allow media to pass through. Taking the energy away from the valve will close it and stop the flow. It works across various media such as water, air, and other low-viscosity fluids.
The orifice size is 2.5 mm, and the Cv value is 0.2. This valve is not recommended for gravity-fed systems because of the small orifice size.
The port size is 1/8" female NPT threaded. The orifice size is 2.5 mm, and the Cv value is 0.2. It can withstand pressure up to 115 psi (8 bar) and temperatures as low as 32°F and as high as 212°F. The seal material is EPDM rubber.
This specific plastic valve has a 120 Volt AC coil with a voltage range that is -+ 10. The coil head is fitted with a 10’’ wire lead that can easily be connected with your own choice of terminals. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.
Common Applications
Common uses include, but are not limited to;
- Water Filters
- Ice Makers
- Drinking Fountains
- Washing Machines
- Dishwashers
- Dental Tools
- Fish Tanks
- Beer Brewing
- Hydroponics
Installation
- This model is mountable in any position.
- It features a conveniently positioned arrow on the body to indicate the direction of flow.
- The valve body is threaded at the base and can quickly be mounted with 4 mm machine screws.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
