1" 24V AC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-25-24VAC
Position
Normally Closed
Port Size
1" Female NPT
Voltage
24V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
25 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-145 PSI | Air 7-145 PSI
Flow Rate
Cv 12 (Appx 92 GPM @ 60 PSI)
Power
19 VA / 1.00 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
2 lb 3 oz
Height
4.50"
Length
3.25" port to port
Width
2.60"
Product Overview
The SZW-25-24VAC is a Normally Closed 1” Inch Stainless Steel Solenoid valve. This valve uses a 24 Volt AC coil that requires 19 VA or 1.00 Amps to operate. A normally closed valve is one that stays in the closed position until power is applied, at which time it will open. The valve will stay open until power is taken away. This is a food-grade solenoid valve that will work with other media such as air, water, gases, fuel, weak acids, and glycol.
This stainless steel valve has a 1” inch NPT female port on both ends. This is a great general-purpose valve because it works with a variety of different media types and handles a wide range of temperatures. The Viton seal in the valve is capable of handling a temperature range from 15°F up to 250°F.
Applications
No minimum pressure is required for the valve to open and close. This makes it ideal for gravity feed applications.
Installation
This valve uses a 24 Volt AC coil that requires 19 VA or 1.00 Amps to operate. It can be connected with its 5.5” lead wires by soldering them or using wire connectors. It is rated for continuous duty; however, it should not be left on indefinitely.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
