1" 110V AC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-25-110VAC
Position
Normally Closed
Port Size
1" Female NPT
Voltage
110V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
25 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-145 PSI | Air 7-145 PSI
Flow Rate
Cv 12 (Appx 92 GPM @ 60 PSI)
Power
15 VA / 0.20 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
2 lb 3 oz
Height
4.50"
Length
3.25" port to port
Width
2.60"
Product Overview
The SZW-25-110VAC is a 2-way, normally closed stainless steel solenoid valve with 1” inch female NPT ports. This valve is controlled by a 110 VAC coil that has a voltage tolerance of +-10% making it suitable for most 120 Volt residential power systems. This valve can handle media temperatures ranging from 15°F up to 250°F. It is compatible with air, water, gas, weak acids, and other low-viscosity fluids (below 20cst).
The SZW-25-110VAC is our most popular 1” valve because it is compatible with most residential 120 Volt AC power systems. This valve has a voltage tolerance of +-10% so it can connect directly to a home’s power. The coil will require 15 VA or 0.20 Amps to actuate. The valve is rated for 100% duty cycle; however, keeping it energized for long periods of time will reduce the life of the coil. It should not be installed continuously as a fail-safe in the event of a power outage. It can be connected with the 5.5” lead wires with terminal connectors or directly soldered.
The orifice size is 25 mm, and the flow rate can be calculated using a Cv of 12. The valve body has standard female NPT connection ports. This solid stainless steel valve weighs approximately 2 lbs 5 oz, dimensions are 4.5” tall, 2.60 width and 3.25” port to port.
Applications
This valve is food- and potable water grade, making it a good choice for industrial or residential applications where a lead-free valve is required. The valve's materials comply with NSF 61; however, it does not have NSF certifications.
Installation
- This valve is mountable in any position; however, coil-up is preferred.
- A Wye Strainer or inline filter is always recommended to keep the valve free from debris that will prevent it from functioning as intended.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
