2" 110V AC Electric Solenoid Valve N/O
Availability: In Stock
Technical Details
SKU
BZW-50K-110VAC
Position
Normally Open
Port Size
2" Female NPT
Voltage
110V AC
Body Material
Brass
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
50 mm
Temp Range
15 to 250° F / -10 to 120°C
Pressure Range
Water: 0-90 PSI | Air 7-90 PSI
Flow Rate
Cv 45 (Appx 345 GPM @ 60 PSI)
Power
40 Watts / 0.50 Amps
Coil Connection
DIN 43650A
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% but not indefinitely
*Suitable Media
Water – Air - Fuel - *Etc
Weight
7 lb 8 oz
Height
7.50"
Length
5.30" port to port
Width
4.25"
Product Overview
The ZW-50K-110V is the largest option we carry in a Normally Open 110V Solenoid Valve. This solenoid valve is constructed of solid brass with 2” female threaded NPT ports on either side. This valve requires no pressure to operate and will work in gravity fed systems. The valve will remain open allowing media to pass until it is powered which will close the valve preventing flow. The Viton diaphragm used in the valve makes it compatible with a wide range of temperatures and chemicals. Power of 0.50 Amps is required.
The ZW-50K-110V includes a IP54 rated, encapsulated coil. This coil is water resistant but should not be installed where it can be directly exposed to the elements.
The coil is 110V AC with a tolerance range of +/- 10% making it appropriate for 120V power sources.
The valve should be installed with coil pointing in the upward position.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
