1/2" 110V AC Electric Solenoid Valve N/O

SKU: NOB12-110V

Availability: In Stock

$54.95

Quick Links

Technical Details

SKU NOB12-110V
Position Normally Open
Port Size 1/2" Female NPT
Voltage 110V AC
Body Material Brass
Components Stainless Steel
Seal Material Viton® Diaphragm
Orifice Size 15 mm
Temp Range 15 to 250° F / -10 to 120°C
Pressure Range 0 - 90 PSI (No Minimum Pressure)
Flow Rate Cv 4.8 (Appx 36 GPM @ 60 PSI)
Power 28 Watts / 0.50 Amps
Coil Connection DIN 43650B
Response Time Fast Acting (Less than one second)
Duty Cycle 100% but not indefinitely
*Suitable Media Water – Air - Fuel - *Etc
Weight 1 lb 9 oz
Height 4.50"
Length 2.36" port to port
Width 1.95"

Product Overview

Featured here is Model NOB12-110V of our brass valve line. This particular valve is a two-way, semi-direct lift valve with a normally open operating position. This means that there are two ports in which media flows and the valve will close when the coil is energized to stop media from passing through. Removing the energy from the valve coil will open it and continue the flow. It works across various media such as hot water, air, gas, diesel fuel, Freon, weak acids and weak alkali. The valve features a heavy duty, solid brass body that’s sure to last in the most strenuous projects.

The port size is 1/2” inch female NPT threaded. This Electric Solenoid Valve can handle low viscosity fluids below 20 cst. The orifice size is 15mm and the Cv value is 4.8. It can withstand pressure up to 90 psi (6 bar) and temperatures as low as 15°F and as high as 250°F. The seal material is VITON. 

This specific valve has a 110 Volt AC coil with a voltage range that is -+ 10. The coil head is fitted with a DIN connection and has 5’’ wire lead that can easily be connected with your own choice of terminals. The top of the coil features a label that indicates the valve type and specifications. Its response time is very low; in fact, it acts in less than one second, making it a great choice for all types of applications.

Customers commonly use the NOB12-110V Valve for Irrigation, Fountains, Water Filtration, Solar Heating, Aquariums, Automotive, Beer Brewing, Hydroponics, HVAC, and Plumbing and everywhere else one of our valves can be applied.

This model is mountable in any position and features a conveniently positioned arrow on the body to indication the direction of flow.

*Consult a chemical compatibility expert for correct seal and valve body material choice.

 

Warranty

Electricsolenoidvalves.com guarantees our valves to be free from defects in workmanship and materials under normal use for One year from the date of purchase.

For complete terms of this warranty see our Warranty Terms & Conditions

Reviews Write a Review

great

Posted by al smiroff on 22nd May 2019

pumps hard vodka

valve is well made, works as advertised

Posted by Larry O'Neill on 17th Apr 2018

valve is used in conjunction with a relay as a failsafe in a residence. It works well, good value.

1/2" solenoid valve

Posted by Lakshman Vadlamani on 8th Feb 2018

Connecting wires can be of better quality

FAST SERVICE, GOOD QUALITY, REASONABLE PRICING

Posted by on 22nd Nov 2016

FAST SERVICE, GOOD QUALITY, REASONABLE PRICING

Works perfect!

Posted by Raul, Owner, PinnaclePlumbing on 6th Jun 2016

I had bought this valve to replace an ASCO valve that I was having trouble with due to not closing when turned back on too fast after being turned off, this valve worked great! and for a fraction of the cost, I will be buying four more to replace others which need to be swapped as well.