3/4" Stainless Steel Electric Ball Valve - 3 Wire
Availability: In Stock
Technical Details
SKU
BVS5CE-XR33-J
Port Size
3/4" Female NPT
Wiring Type
3-Wire Power-driven open and close
Actuator
XR33 - 3 Wire
Actuation Method
Direct motor-driven
Voltage Range
9 to 24V AC/DC
Body Material
304 Stainless Steel
Components
Stainless Steel
Seal Material
EPDM
Ball Seat
PTFE
Gears
Metal
Bore Type
Full
Flow
Bi-Directional
Media Temperature
35 - 200° F / 2 to 90°C
Ambient Temperature
5 - 120°F / -15 to 50 °C
Pressure Range
0 - 185 PSI (No Minimum)
Max Torque
3 Nm
Actuator Connection
Lead Wires
Closing / Opening Time
≤5 Seconds
Working Current
≤500 mA
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Enclosure Rating
IP67 (NEMA 4 equivalent)
Weight
1 lb 0.8 oz
Height
4.25"
Length
2.83" port to port
Width
2.56" (actuator)
Life Expectancy
70,000 Cycles
Fail position
Last position on power loss
Recommended Maximum Cycling Rate
≤ 3 cycles / min
Product Overview
This motorized ball valve is a great choice when you need something with a high flow, slow closing time (does not cause water hammer), and low power. The valves do not require power to hold position, making any burnout similar to solenoid valves very rare.
Another great feature of ball valves is the ability to control flow in both directions. This 3/4" Stainless Steel Electric Ball Valve comes in a 3 Wire configuration. With this type of wiring setup, the red/black wires stay connected to the positive/ground. The Green wire is the control wire that sends a signal to move the actuator. The green wire can be connected by means of a switch, relay, or other type of controller.
- 9 to 24V AC/DC (auto-detects voltage)
Valve Details
- The valve body is made of 304 stainless steel.
- The internal ball is made of 316 stainless steel
- Sealing components are EPDM and PTFE.
This combination of materials with the lead-free body makes the valve suitable for potable water applications or those seeking NSF certification.
Installation
The actuator on the valve is enclosed and features an indicator window to show the position of the valve. The housing is weatherproof and equivalent to NEMA 4 or IP67, making it safe to use in wet locations like outdoors.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
