3/8'' 12V DC Electric Brass Solenoid Valve N/O
Availability: In Stock
Technical Details
SKU
BZW-10K-12VDC
Position
Normally Open
Port Size
3/8" Female NPT
Voltage
12V DC
Body Material
Brass
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
5 to 250°F
Pressure Range
0 to 90 psi
Flow Rate
Cv 3.5 (Appx 27 GPM @ 60 psi)
Power
16 Watts | 1.50 Amps
Coil Connection
DIN 43650B
Protection Class
IP54
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water | Air | Fuel
Weight
1 lb 10.46 oz
Height
4.00"
Length
2.36" port to port
Width
1.80"
CAD Files
Available upon Request
Product Overview
The BZW-10K-12VDC is a durable 3/8" brass solenoid valve engineered for fail-open, zero-differential fluid control in 12V DC battery-powered, mobile, and off-grid systems. Featuring a high-performance Viton® (FKM) diaphragm seal and a direct-assisted lift mechanism, this 2-way Normally Open (N/O) valve remains open when de-energized to permit unrestricted flow at 0 PSI, closing in less than one second when 12V DC power is applied.
Normally Open Application & Media Notice:
-
-
- This valve is Normally Open (remains open when de-energized and closes when energized). It is designed specifically for fail-open setups, gravity-fed drains, freeze/overheat protection loops, and safety bypass lines.
- Built with a solid brass body and a Viton® (FKM) diaphragm rated up to 250°F for water, air, diesel fuel, and glycol.
- Brass is not recommended for salt water, deionized water, or aggressive acids.
- Always verify chemical compatibility before installation.
-
Key Features
- Solid Brass Body & Viton® Seal: Excellent mechanical strength and thermal resistance (up to 250°F) for water, air, diesel fuel, and neutral gases.
- Normally Open (Fail-Open) Operation: Keeps fluid flowing or lines drained during power interruptions—essential for emergency dump lines and solar/battery safety circuits.
- 12V DC Mobile & Off-Grid Integration: Lead wires connect directly into vehicle electrical systems, 12V battery banks, solar charge controllers, and low-voltage relays (non-polarized).
- Zero Differential Operation: Direct-assisted design operates reliably from 0 psi (gravity feed) up to maximum working pressure.
- Fast-Acting & Continuous Duty: Closes in under one second when energized and rated for 100% continuous-duty operation.
Common Applications
- Commercial laundry machine fill lines, rinse cycle water control, and inlet shutoff
- Industrial humidifier feed lines, reservoir make-up water control, and humidification system shutoff
- Sprinkler zone control, grounds irrigation manifolds, and scheduled watering circuits
- Auxiliary diesel fuel transfer bypass, generator fuel lines, and glycol circulation
- Commercial beverage equipment, high-temp sanitizing dump lines, and gas purge loop
- Batch dispensing lines, dosing pump feed control, and metered fill and top-up stations
- Process water branch line control, tank fill and transfer, and recirculation loop isolation
Installation
- Align media flow with the directional arrow cast into the brass body.
- Non-polarized 12V DC lead wires can be connected in either orientation.
- For optimal service life and reliable seal closure, especially in gravity-fed drain lines, mount the valve with the coil facing upward.
- Install an inline strainer upstream to keep sediment off the Viton® diaphragm.