3/8'' 12V DC Electric Stainless Steel Solenoid Valve N/O
Availability: In Stock
Technical Details
SKU
SZW-10K-12VDC
Position
Normally Open
Port Size
3/8" Female NPT
Voltage
12V DC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
15 mm
Temp Range
5 to 250°F
Pressure Range
0 to 90 psi
Flow Rate
Cv 3.5 (Appx 27 GPM @ 60 PSI)
Power
16 W / 1.50 Amps
Coil Connection
DIN 43650B
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
*Suitable Media
Water – Air - Fuel - *Etc
Weight
1 lb 8.69 oz
Height
4.29"
Length
2.36" port to port
Width
1.80"
CAD Files
Available upon Request
Product Overview
The SZW-10K-12VDC is a heavy-duty 3/8" 304 stainless steel solenoid valve engineered for fail-open, zero-differential fluid control in 12V DC battery-powered, mobile, and off-grid systems. Featuring a Viton® (FKM) diaphragm seal and a direct-assisted lift mechanism, this 2-way Normally Open (N/O) valve remains open when de-energized to allow unrestricted flow at 0 PSI, snapping shut in less than a second when 12V DC power is applied.
Normally Open Application & Media Notice:
-
-
- This valve is Normally Open (remains open when de-energized and closes when energized). It is designed specifically for fail-open setups, gravity-fed drains, freeze/overheat protection loops, and safety bypass lines.
- Equipped with a Viton® (FKM) diaphragm rated for media up to 250°F, diesel fuel, glycol, weak acids, and harsh fluids.
- Always verify chemical compatibility before installation.
-
Key Features
-
304 Stainless Steel & Viton® Construction: Exceptional corrosion, chemical, and temperature resistance for harsh fluids, potable water, and outdoor environments.
-
Normally Open (Fail-Open) Operation: Keeps fluid flowing or lines drained during power interruptions—essential for emergency dump lines and solar/battery safety circuits.
-
12V DC Mobile/Off-Grid Wiring: Connects directly into vehicle electrical systems, 12V battery banks, and solar charge controllers using an IP65-rated DIN electrical connector.
-
Zero Differential Operation: Direct-assisted design operates reliably from 0 PSI (gravity feed) up to maximum working pressure.
-
Fast-Acting & 100% Duty Cycle: Closes in under one second when energized and rated for continuous-duty operation.
Common Applications
-
Gravity-fed water tank drains, reservoir dumping, and agricultural irrigation
-
Solar thermal overheat dump lines, freeze-protection loops, and HVAC circulation
-
RV, marine, and mobile food truck plumbing and emergency fluid release
-
Auxiliary diesel fuel bypass, vehicle fluid transfer, and glycol circulation
-
Battery-operated gas sampling purge lines and remote environmental monitoring
Installation
- Align media flow with the directional arrow cast into the 304 stainless body.
- Connect 12V DC power using the included DIN electrical connector.
- For optimal service life and reliable seal closure, especially in gravity-fed drain lines, mount the valve with the coil facing upward.
- Install an inline strainer upstream to keep sediment off the Viton® diaphragm.
