1/8" 110V AC Stainless Electric Solenoid Valve
Availability: In Stock
Technical Details
SKU
SS-2J-110VAC
Position
Normally Closed
Port Size
1/8" Female NPT
Voltage
110V AC
Body Material
316 Stainless Steel
Components
304 Stainless Steel
Seal Material
Viton®
Orifice Size
2 mm
Temp Range
5 to 250°F
Pressure Range
0 - 145 PSI (No Minimum)
Flow Rate
Cv 0.12 (Appx 0.9 GPM @ 60 PSI)
Power
10 VA
Coil Connection
Lead Wires
Coil Insulation & Class
Class F (311°F)
Protection Class
IP 65
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel - *Etc.
Weight
10 oz
Height
2.62"
Length
1.60" port to port
Width
1.20"
Product Overview
The SS-2J-110VAC is a compact, direct-acting 1/8" stainless steel solenoid valve engineered for reliable flow control of aggressive liquids, gases, diesel fuel, and high-temperature water. Featuring a solid stainless steel body and a high-performance Viton (FKM) seal, this 2-way normally closed valve operates at 0 PSI differential, opening automatically when energized by standard 110V/120V AC line power.
Media Compatibility Notice: Equipped with a premium Viton (FKM) seal, this valve is rated for hot water up to 250°F, diesel fuel, oils, weak acids, and harsh fluids that degrade standard NBR rubber. Always verify chemical compatibility with both the stainless body and Viton® seal before installation.
Key Features
-
Stainless Steel & Viton Construction: Maximum chemical, corrosion, and temperature resistance for demanding fluid media.
-
Zero Differential Operation: Direct-acting mechanism opens reliably at 0 PSI without requiring line pressure.
-
Standard 110V/120V AC Line Power: Connects directly into building power, relays, and automated timing circuits via lead wires (non-polarized).
-
Normally Closed Safety: Valve remains closed during power loss, stopping media flow automatically.
-
Compact Footprint: 1/8" female NPT ports designed for tight equipment enclosures and automated manifolds.
Common Applications
-
Commercial espresso machines, beverage equipment, and high-temp water systems
-
Diesel fuel transfer, auxiliary fuel tanks, and biofuel metering
-
Reverse osmosis (RO) and deionized (DI) water purification lines
-
Chemical dosing, weak acid injection, and laboratory fluid sampling
-
High-pressure misting, humidification, and solar thermal loops
Installation
- Align media flow with the direction arrow cast into the stainless valve body.
- For optimal performance and longevity, install the valve with the coil facing upward.
- Place an inline strainer or filter upstream to prevent debris from reaching the Viton seal.
