3/4" 110V AC Stainless Steel Solenoid Valve
Availability: In Stock
Technical Details
SKU
SZW-20-110VAC
Position
Normally Closed
Port Size
3/4" Female NPT
Voltage
110V AC
Body Material
Stainless Steel
Components
Stainless Steel
Seal Material
Viton® Diaphragm
Orifice Size
20 mm
Temp Range
15 to 250° F | -10 to 120°C
Pressure Range
Water: 0-145 PSI | Air 7-145 PSI
Flow Rate
Cv 7.6 (Appx 58 GPM @ 60 PSI)
Power
15 VA | 0.15 Amps
Coil Connection
Lead Wires
Response Time
Fast Acting (Less than one second)
Duty Cycle
100% Duty at Rated Ambient Temperature
Suitable Media
Water – Air - Fuel
Weight
1 lb 6 oz
Height
4.25"
Length
2.65" port to port
Width
1.77"
Product Overview
Our SZW-20 110VAC is a 110 Volt, 3/4”, 2 Way Stainless steel solenoid valve suitable for water, gas, air, weak acids, alkali, glycol, and other low-viscosity fluids. This particular valve is also food-grade and suitable for potable water, making it a great valve for industrial settings and food and beverage systems. The Viton seal in this valve is capable of handling media as high as 250°F and as low as 15°F, making it a great general-purpose valve. This is normally closed, meaning the valve is closed without power and opens when power is applied. The 110 volt coil is compatible with common residential 120 volt systems.
The SZW-20-110VAC is our most popular stainless steel valve because it can be directly installed in most residential homes. The coil is 110 Volts AC with a tolerance of +/- 10%, making it perfect for 120 Volt AC home power systems. The valve is rated for 100% duty but not indefinitely. A normally closed valve should never be installed as a fail-safe in the event of a power failure because the coil will burn out over time.
Common Applications
- The valves have a lead-free stainless steel body, and components are ideal for installations where a lead-free valve is required.
- Potable water applications
- Industrial food preparation
- Manufacturing settings
This valve will conform to NSF61 but does not have NSF certifications in place.
Installation
- The valve has no polarity, making power and ground interchangeable.
- There is an arrow indicating the direction of flow on the stainless valve body.
- Coil up is the preferred mounting direction, but if necessary, it can be installed in any position.
- An inline filter is recommended to keep debris from impeding the flow and seal.
- The coil has a 5.5” wire connection that can be connected by soldering it, using terminal connectors, or common wire nuts.
*Consult a chemical compatibility expert for correct seal and valve body material choice.
